| To: | Bill Straw via TowerTalk <TowerTalk@contesting.com> | 
|---|---|
| Subject: | [TowerTalk] Yaesu G-2800 difference from G-1000 | 
| From: | Tim Wininger <ky5rtim@gmail.com> | 
| Date: | Thu, 6 Nov 2014 08:47:59 -0600 | 
| List-post: | <towertalk@contesting.com">mailto:towertalk@contesting.com> | 
| Anyone have any insight into the difference between the Yaesu G-1000 rotor vice the G-2800 rotor mechanically? Also practical use/loading of a G-2800 ie type of antennas it will reliably handle.......... Have had 3 ea G-1000's rotating boom lengths of 30ft or less and windloads of 10 sq ft or less for 8 yrs with no problem here in NW Alabama. Looking at installing a M2 80mtr rotary dipole (94ft long 10sqft) and turning with the G-2800. Tnx fer info Tim, AB4B _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk | 
| <Prev in Thread] | Current Thread | [Next in Thread> | 
|---|---|---|
| 
 | ||
| Previous by Date: | Re: [TowerTalk] Rotor cable / Steppir cable connectors, john@kk9a.com | 
|---|---|
| Next by Date: | [TowerTalk] FW: Take off angle of yagi vs a wire antenna at about 30', Matt | 
| Previous by Thread: | [TowerTalk] Take off angle of yagi vs a wire antenna at about 30', David Gallatin via TowerTalk | 
| Next by Thread: | Re: [TowerTalk] Yaesu G-2800 difference from G-1000, Tony | 
| Indexes: | [Date] [Thread] [Top] [All Lists] |