https://www.superbrightleds.com/moreinfo/bayonet-bulbs/ba9s-led-bulb-1-led/4/
exact led replacement
N9IWW
-----Original Message-----
From: towertalk-request@contesting.com
Sent: Thursday, October 23, 2014 2:14 PM
To: towertalk@contesting.com
Subject: TowerTalk Digest, Vol 142, Issue 49
Send TowerTalk mailing list submissions to
towertalk@contesting.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.contesting.com/mailman/listinfo/towertalk
or, via email, send a message with subject or body 'help' to
towertalk-request@contesting.com
You can reach the person managing the list at
towertalk-owner@contesting.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of TowerTalk digest..."
Today's Topics:
1. Tailtwister bulb (Gary Smith)
2. Re: Tailtwister bulb (L L bahr )
3. Re: Tailtwister bulb (L L bahr )
4. Re: Tailtwister digital interface (Ken Beals)
5. Re: Cadweld vs clamps (john@kk9a.com)
6. Re: Tailtwister bulb (Mike Fahmie via TowerTalk)
7. Re: Tailtwister digital interface (Greg)
8. Re: Tailtwister bulb (n8de@thepoint.net)
----------------------------------------------------------------------
Message: 1
Date: Thu, 23 Oct 2014 13:18:06 -0400
From: "Gary Smith" <Gary@ka1j.com>
To: towertalk@contesting.com
Subject: [TowerTalk] Tailtwister bulb
Message-ID: <5449384E.26985.27FCD5@Gary.ka1j.com>
Content-Type: text/plain; charset=US-ASCII
I ordered a LED kit from Idiom Press to
replace the burned out 1819 bulb in my
tailtwister controller but Idiom stuck me
& kept the money, sent nothing, won't
return emails and the phone isn't
answered, and there's a default message
saying the user has not set up the
mailbox.
So I'm looking for a better alternative to
the 1819 bulb & if there's a known better
LED alternative, does anyone have a source
or link they can share.
Also, I saw Idiom has a digital mod to the
Tailtwister but after this experience I'm
not sending anything to them again. Is
there an aftermarket rotor that has a
manual digital input of some kind? I don't
want to have the rotor aim every time I
enter a call into my logging program.
73,
Gary
KA1J
---
This email is free from viruses and malware because avast! Antivirus
protection is active.
http://www.avast.com
------------------------------
Message: 2
Date: Thu, 23 Oct 2014 13:24:40 -0400 (EDT)
From: "L L bahr " <pulsarxp@embarqmail.com>
To: Gary@ka1j.com
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] Tailtwister bulb
Message-ID:
<1175885724.7687974.1414085080648.JavaMail.root@embarqmail.com>
Content-Type: text/plain; charset=utf-8
I bought an LED light kit from Unified Microsystems. www.unifiedmicro.com
Lee, w0vt
----- Original Message -----
From: "Gary Smith" <Gary@ka1j.com>
To: towertalk@contesting.com
Sent: Thursday, October 23, 2014 12:18:06 PM
Subject: [TowerTalk] Tailtwister bulb
I ordered a LED kit from Idiom Press to
replace the burned out 1819 bulb in my
tailtwister controller but Idiom stuck me
& kept the money, sent nothing, won't
return emails and the phone isn't
answered, and there's a default message
saying the user has not set up the
mailbox.
So I'm looking for a better alternative to
the 1819 bulb & if there's a known better
LED alternative, does anyone have a source
or link they can share.
Also, I saw Idiom has a digital mod to the
Tailtwister but after this experience I'm
not sending anything to them again. Is
there an aftermarket rotor that has a
manual digital input of some kind? I don't
want to have the rotor aim every time I
enter a call into my logging program.
73,
Gary
KA1J
---
This email is free from viruses and malware because avast! Antivirus
protection is active.
http://www.avast.com
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
------------------------------
Message: 3
Date: Thu, 23 Oct 2014 13:31:08 -0400 (EDT)
From: "L L bahr " <pulsarxp@embarqmail.com>
To: Gary@ka1j.com
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] Tailtwister bulb
Message-ID:
<1561272822.7693455.1414085468828.JavaMail.root@embarqmail.com>
Content-Type: text/plain; charset=utf-8
Talking about Idium Press, I bought a new hand key from them a few years
ago. The knob had been either purposely broken off or accidentally broken
off and then glued in place. The problem was the knob was tilted on an
angle and looked terrible. When I complained the jerk said I could buy a
new knob from him at some ridiculous cost. I never bought a thing from that
A** H*** again.
Lee, w0vt
----- Original Message -----
From: "Gary Smith" <Gary@ka1j.com>
To: towertalk@contesting.com
Sent: Thursday, October 23, 2014 12:18:06 PM
Subject: [TowerTalk] Tailtwister bulb
I ordered a LED kit from Idiom Press to
replace the burned out 1819 bulb in my
tailtwister controller but Idiom stuck me
& kept the money, sent nothing, won't
return emails and the phone isn't
answered, and there's a default message
saying the user has not set up the
mailbox.
------------------------------
Message: 4
Date: Thu, 23 Oct 2014 17:34:22 +0000
From: Ken Beals <k6mr@outlook.com>
To: " Gary@ka1j.com " <Gary@ka1j.com>, " towertalk@contesting.com "
<towertalk@contesting.com>
Subject: Re: [TowerTalk] Tailtwister digital interface
Message-ID: <BLU406-EAS256A0852DF76F1A2F8067A09E920@phx.gbl>
Content-Type: text/plain; charset="utf-8"
Easy Rotor Control:
http://schmidt-alba.de/eshop/index.php?XTCsid=b090e4551e417d75e20863faa57346a8
They are the anti-Idiom Press: great products and great customer service. If
you get the ERC-M you can control two rotators from one USB port.
Supported by PstRotator software and others I?m sure.
Ken K6MR
From: L L bahr
Sent: ?Thursday?, ?23? ?October?, ?2014 ?10?:?25
To: Gary@ka1j.com
Cc: towertalk@contesting.com
I bought an LED light kit from Unified Microsystems. www.unifiedmicro.com
Lee, w0vt
----- Original Message -----
From: "Gary Smith" <Gary@ka1j.com>
To: towertalk@contesting.com
Sent: Thursday, October 23, 2014 12:18:06 PM
Subject: [TowerTalk] Tailtwister bulb
I ordered a LED kit from Idiom Press to
replace the burned out 1819 bulb in my
tailtwister controller but Idiom stuck me
& kept the money, sent nothing, won't
return emails and the phone isn't
answered, and there's a default message
saying the user has not set up the
mailbox.
So I'm looking for a better alternative to
the 1819 bulb & if there's a known better
LED alternative, does anyone have a source
or link they can share.
Also, I saw Idiom has a digital mod to the
Tailtwister but after this experience I'm
not sending anything to them again. Is
there an aftermarket rotor that has a
manual digital input of some kind? I don't
want to have the rotor aim every time I
enter a call into my logging program.
73,
Gary
KA1J
---
This email is free from viruses and malware because avast! Antivirus
protection is active.
http://www.avast.com
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
------------------------------
Message: 5
Date: Thu, 23 Oct 2014 12:44:29 -0500
From: "john@kk9a.com" <john@kk9a.com>
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Cadweld vs clamps
Message-ID: <0d3bbd9043eeeb409ee99597a0dd19fe.squirrel@www11.qth.com>
Content-Type: text/plain;charset=iso-8859-1
Cadweld probably works well for wire. I use 2" copper strap and PolyPhaser
clamps. Is Cadweld available for strap?
John KK9A
To: Towertalk <towertalk@contesting.com>
Subject: [TowerTalk] Cadweld vs clamps
From: Bill Turner <dezrat@outlook.com>
Date: Wed, 22 Oct 2014 20:49:19 -0700
List-post:
I watched the video about Cadweld and read the info, but I'm still not
convinced it is better than old fashioned ground rod clamps.
Comments?
73, Bill W6WRT
------------------------------
Message: 6
Date: Thu, 23 Oct 2014 18:03:43 +0000 (UTC)
From: Mike Fahmie via TowerTalk <towertalk@contesting.com>
To: L L bahr <pulsarxp@embarqmail.com>, Towertalk Reflector
<towertalk@contesting.com>
Subject: Re: [TowerTalk] Tailtwister bulb
Message-ID:
<1977010035.145531.1414087423280.JavaMail.yahoo@jws100142.mail.ne1.yahoo.com>
Content-Type: text/plain; charset=UTF-8
Newark stocks a whole selection of LED's with bayonet bases.-Mike-
http://www.newark.com/webapp/wcs/stores/servlet/Search?catalogId=15003&langId=-1&storeId=10194&categoryId=800000005533&st=led%20bayonet&pageSize=25&showResults=true&pf=810014984,810111219
From: L L bahr <pulsarxp@embarqmail.com>
To: Gary@ka1j.com
Cc: towertalk@contesting.com
Sent: Thursday, October 23, 2014 10:24 AM
Subject: Re: [TowerTalk] Tailtwister bulb
I bought an LED light kit from Unified Microsystems.? www.unifiedmicro.com
Lee, w0vt
----- Original Message -----
From: "Gary Smith" <Gary@ka1j.com>
To: towertalk@contesting.com
Sent: Thursday, October 23, 2014 12:18:06 PM
Subject: [TowerTalk] Tailtwister bulb
I ordered a LED kit from Idiom Press to
replace the burned out 1819 bulb in my
tailtwister controller but Idiom stuck me
& kept the money, sent nothing, won't
return emails and the phone isn't
answered, and there's a default message
saying the user has not set up the
mailbox.
So I'm looking for a better alternative to
the 1819 bulb & if there's a known better
LED alternative, does anyone have a source
or link they can share.
Also, I saw Idiom has a digital mod to the
Tailtwister but after this experience I'm
not sending anything to them again. Is
there an aftermarket rotor that has a
manual digital input of some kind? I don't
want to have the rotor aim every time I
enter a call into my logging program.
73,
Gary
KA1J
---
This email is free from viruses and malware because avast! Antivirus
protection is active.
http://www.avast.com
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
------------------------------
Message: 7
Date: Thu, 23 Oct 2014 11:05:51 -0700
From: Greg <ab7r@cablespeed.com>
To: Ken Beals <k6mr@outlook.com>
Cc: "Gary@ka1j.com" <Gary@ka1j.com>, "towertalk@contesting.com"
<towertalk@contesting.com>
Subject: Re: [TowerTalk] Tailtwister digital interface
Message-ID:
<CAPE+ietXQC7qCVhY-JFnKtMcuMVZGmq3CAiPuUKB9mDHWSUWkw@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
If anyone is interested I have an unbuilt kit for the ERC-M with LAN
option, rotor card and the enclosure. $150 shipped CONUS.
73
Greg
AB7R
On Thu, Oct 23, 2014 at 10:34 AM, Ken Beals <k6mr@outlook.com> wrote:
Easy Rotor Control:
http://schmidt-alba.de/eshop/index.php?XTCsid=b090e4551e417d75e20863faa57346a8
They are the anti-Idiom Press: great products and great customer service.
If you get the ERC-M you can control two rotators from one USB port.
Supported by PstRotator software and others I?m sure.
Ken K6MR
From: L L bahr
Sent: ?Thursday?, ?23? ?October?, ?2014 ?10?:?25
To: Gary@ka1j.com
Cc: towertalk@contesting.com
I bought an LED light kit from Unified Microsystems. www.unifiedmicro.com
Lee, w0vt
----- Original Message -----
From: "Gary Smith" <Gary@ka1j.com>
To: towertalk@contesting.com
Sent: Thursday, October 23, 2014 12:18:06 PM
Subject: [TowerTalk] Tailtwister bulb
I ordered a LED kit from Idiom Press to
replace the burned out 1819 bulb in my
tailtwister controller but Idiom stuck me
& kept the money, sent nothing, won't
return emails and the phone isn't
answered, and there's a default message
saying the user has not set up the
mailbox.
So I'm looking for a better alternative to
the 1819 bulb & if there's a known better
LED alternative, does anyone have a source
or link they can share.
Also, I saw Idiom has a digital mod to the
Tailtwister but after this experience I'm
not sending anything to them again. Is
there an aftermarket rotor that has a
manual digital input of some kind? I don't
want to have the rotor aim every time I
enter a call into my logging program.
73,
Gary
KA1J
---
This email is free from viruses and malware because avast! Antivirus
protection is active.
http://www.avast.com
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
------------------------------
Message: 8
Date: Thu, 23 Oct 2014 14:14:24 -0400
From: n8de@thepoint.net
To: Gary@ka1j.com
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] Tailtwister bulb
Message-ID: <20141023141424.2cznggckgg404g4o@webmail.win.net>
Content-Type: text/plain; charset=ISO-8859-1; DelSp="Yes";
format="flowed"
Look on ebay for 12v LED strips .. 3 per section ... 200+ sections on
a roll ... cost me something like $5.00 including shipping.
73
Don
N8DE
Quoting Gary Smith <Gary@ka1j.com>:
I ordered a LED kit from Idiom Press to
replace the burned out 1819 bulb in my
tailtwister controller but Idiom stuck me
& kept the money, sent nothing, won't
return emails and the phone isn't
answered, and there's a default message
saying the user has not set up the
mailbox.
So I'm looking for a better alternative to
the 1819 bulb & if there's a known better
LED alternative, does anyone have a source
or link they can share.
Also, I saw Idiom has a digital mod to the
Tailtwister but after this experience I'm
not sending anything to them again. Is
there an aftermarket rotor that has a
manual digital input of some kind? I don't
want to have the rotor aim every time I
enter a call into my logging program.
73,
Gary
KA1J
---
This email is free from viruses and malware because avast! Antivirus
protection is active.
http://www.avast.com
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
------------------------------
Subject: Digest Footer
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
------------------------------
End of TowerTalk Digest, Vol 142, Issue 49
******************************************
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|