Hi Rick, I have used the falling derrick system on towers up to 60ft. I am
not familiar with the tipping point phenomenon so you might elaborate on
that a bit.
73,
Gerald K5GW
In a message dated 10/18/2014 9:05:28 A.M. Pacific Daylight Time,
richard@karlquist.com writes:
An additional consideration in tilting up a
tower in one piece is how much guying is needed.
While Rohn 25 can be tilted up, it typically
requires multiple levels of guying just to be
tilted up. This is without any consideration
of wind. This in turn rules out a simple gin
pole or crane and requires a falling derrick, which
pulls on both the upper and lower guys. A
lighter weight tower with greater strength
such as an aluminum self supporting type can
be tilted with a simple gin pole using one
lift point. Additional levels of guying for
wind purposes can still be used after erection
is complete. Falling derricks have their place,
but are definitely more complicated, and are
harder to control because of the tipping point
phenomenon. You essentially need dueling winches
to get through the tipping point. If anyone
has solved this problem, please let us know.
Rick N6RK
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|