Towertalk
[Top] [All Lists]

Re: [TowerTalk] Inner station RF feed lines

To: "'Wayne Kline'" <w3ea@hotmail.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Inner station RF feed lines
From: "Wes Attaway \(N5WA\)" <wesattaway@bellsouth.net>
Date: Fri, 17 Oct 2014 15:15:53 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
The RG400 and RG214 are both 50-ohms.  RG214 has lower loss.  I doubt that
12-ft of RG400 would make any measurable difference.

If you are going to blame the 12-ft of RG400 every time you miss a station
in a pileup then don't use it.



----------------- Wes Attaway (N5WA) ------------------- 
1138 Waters Edge Circle, Shreveport, LA 71106 
                  --- 318-393-3289 (Cell) ---
        Computer Consulting and Forensics 
-------------- EnCase Certified Examiner --------------- 


-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Wayne
Kline
Sent: Friday, October 17, 2014 3:00 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Inner station RF feed lines

 OK  another dumb question.. I have a 100 ft spool of Alpha RG400 and about
60 ft. of Belden   RG 142.
 
I have used  pieced B-4  for some Radio /AMP    Amp Wattmeter and radio BPF
box.
 
With 9  RG 214 jumpers coming from the outside shack BOX to the
distribution/ground   panel.
 
What's the thought on using it to the 6X2 box and then to the  amps  ect ?
longest run would be 12 ft 
 
Or should I stick to the  RG214 ? 
 
 
Wayne W3EA 
                                          
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>