I think he may be looking for an app that will do a station block
diagram. In that case something like Smartdraw works pretty well.
-Steve K8LX
On 10/17/2014 7:00 AM, David Robbins wrote:
For my so2r position I have gone to a touch screen with greenheron software
controlling a greenheron wireless base and remote modules for all the
switches(7) and greenheron rotors(9) for all the rotors. I switched to
arraysolutions band decoders and filters, but am still using the old sixpak
switch with an rcs-8v add-on for warc band selection. Just one specific
recommendation, get a BIG touch screen, mine is a planar 22" one, this lets
you make the buttons big enough to hit easily. I tried a couple tablets and
was not happy with the ease of reading or use.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Wayne
Kline
Sent: Friday, October 17, 2014 02:39
To: towertalk@contesting.com
Subject: [TowerTalk] simple station design
Hi Fellow TT'ers.
Rebuilding operating position and making all modular control lines. 7
rotors, three stack match, two beverage switched not to mention band
decoders BP filters
SO My old Station Bible is Fubar it's been 23 years I am hoping I can
find something other them my Hieroglyphics drawings and pencil lines...
Wayne W3EA
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|