Thanks, Grant -
MM-C is the goto place for sure. I just need the size.
I meant to type crufted. Autocorrect changed it. We used the word cruft in my
programming shop to mean junk. If code was crufted, it was fubared. Autocorrect
changed that to fibered......AAARRRGGhhhhh
73, Mike
On Jun 2, 2014, at 12:14 PM, Grant Saviers <grants2@pacbell.net> wrote:
> McMaster has balls in stainless, 304, 316, and 440. 316 isn't the hardest
> but is the most corrosion resistant. They are what I use for rotator
> rebuilds.
>
> If you meant "cratered" which happens when the mast oscillates then it might
> be possible to smooth that out a bit with sandpaper since the bearing is
> pretty crude to start with. Works for rotator races. Adding a couple of
> grease fittings which get a shot of grease every year will also help a lot.
> I like the TFE loaded full synthetic "Super Lube" formerly by Synco, now
> owned by Loctite.
>
> Grant KZ1W
>
> On 6/2/2014 7:20 AM, Charles Gallo wrote:
>> Ceramic balls have an issue, they really really don't like jarring loads.
>> Their failure mode is to break, vs rust
>>
>> --
>> 73 de KG2V
>> Charlie
>>
>>> On Jun 2, 2014, at 10:00 AM, Mike Reublin NF4L <nf4l@comcast.net> wrote:
>>>
>>> Does anybody know what size balls are in the Yaesu GS-065 thrust bearing?
>>> My cheap caliper isn't precise enough. Looks like 3/8". They're rusted and
>>> bumpy.
>>>
>>> Has anyone had experience with ceramic balls?
>>>
>>> The grease is so hard I'm having to soak it off so I can see the races. If
>>> they're crafted, I'll just replace the whole thing.
>>>
>>> 73, Mike NF4L
>>>
>>>
>>> _______________________________________________
>>>
>>>
>>>
>>> _______________________________________________
>>> TowerTalk mailing list
>>> TowerTalk@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/towertalk
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|