Towertalk
[Top] [All Lists]

Re: [TowerTalk] Antenna matching values

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] Antenna matching values
From: "Ian White" <gm3sek@ifwtech.co.uk>
Date: Wed, 23 Apr 2014 08:11:51 +0100
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
>
>I found the problem.  Torn cable into coax.   Must've snagged.   Thanks
guys.
>Odd that damage only showed as a 2.0:1 mismatch!
>

It depends on which conductor was torn. A torn center conductor is
usually quite dramatic: everything stops. On the other hand, a torn
shield can often cause only a moderate mismatch because the shield
current finds other return paths through other "ground" connections...
creating much confusion along the way. 

We often see these sudden puzzling problems reported on radio-related
mailing lists, and bad shield connections turn out to be THE most common
single cause. Of course it might be something else, but it's probably a
mistake to mess with other parts of the system (like gamma matches ;-)
without first having checked ALL the coax cables and shield connections.


73 from Ian GM3SEK


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>