I acquired an older layover fixture (believe it is a HyGain) and have modified
the pulley wheel from a single wheel to a double wheel. I believe the double
pulley-wheel was standard on later fixtures.
My tower does NOT have an attachment welded to the tower to attach the tower
dual pulley-wheels so have had a local cable rigger make me a loop which goes
around the tower and will be held in place with shackles holding the cable to
the tower cross braces.
My first question is – on the towers equipped with the pulley mounting plate
how high up from the base is the pulley attachment point.
Second question – what size cable is used and what length was provided with the
original HyGain setup?
Don W7WLL
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|