IT all depends on what tower your talking about... I have installed antennas
via tram or pull & snake above a set of guys. But were talking about Rohn 55
or Rohn 65 or AB-105... My Rohn 25G towers the top set of guys are down 4 ft
on the flat plate top design tops. and IMHO there is no problem Tramming
a large 30 plus ft boom
HF antenna even with a back stay and the guys @ the joint..... Could create
some pucker in the seat of your pants ! can you do it SURE but would it be a
comfortable on Rohn 25G ??? a then there are variables Sold concrete base ?
Peir pin base at 80 ,80 or 100 ft ??? or 40ft tower with the guys @ 80% or 32
' No problem
YMMV Wayne W3EA . .
> From: infomet@embarqmail.com
> To: towertalk@contesting.com
> Date: Mon, 24 Mar 2014 15:03:45 -0400
> Subject: [TowerTalk] First Tower
>
> Is it common to work above the top guys, after installation?
> I’m not sure I’d want to handle a heavy beam or do tramming above a joint.
> I “think” it would be OK, but would like to hear from TWHDI (those who have
> done it).
> WL
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|