On 2/23/2014 10:28 PM, Allen R. Brier wrote:
Is it possible that the pot inside my TailTwister rotor has moved? My
antenna direction on my controller now shows 90 degrees off (to the West)
for some reason. I climbed up the tower and confirmed that the mast has not
slipped in the rotator clamp or at the boom to mast clamp. I checked wiring
connections and all seems to be ok. Did the pot move 90 degrees? Anyone ever
see this before? I would appreciate any advice on this before I go through
the trouble of replacing the rotor with a spare. BTW, I am using a Green
Heron Engineering controller.
Unless they've changed the /ham series of rotators yse a wire wound
resistor and a wiper fastened to the bell. It would be difficult for
one of these to slip and still work at all. For them to be off either
the bell has to be positioned wrong or the mast has slipped in the mount.
73
Roger (K8RI)
Allen R. Brier N5XZ / KL5DX
1515 Windloch Lane
Richmond, TX 77406-2553
281-342-1882 (Home)
713-705-4801 (Cell)
n5xz@earthlink.net
n5xz@arrl.net
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|