On 1/11/2014 4:08 PM, Jim Lux wrote:
I use a variety of Anderson PowerPole based distribution schemes. The
basic connector is available in a whole lot of different current ratings.
This is what I use. I put the smaller ones (the family that used by the
K3) on every piece of equipment in my shack that runs on 12-14VDC. I
use the larger grey plugs at each power source (power supply or
battery), with a mating grey plug that is wired to multiple cables with
the smaller plugs.
West Mountain Radio makes a variety of fused and unfused distribution
panels. Rigrunner 4005, etc.
I have two of these in my station, and they're both full.
PowerWerx.com has been a good vendor for me
http://www.powerwerx.com/powerpole-power-distribution/
I get my West Mountain stuff from them (as well as the connectors)..
Same here -- they seem to have the best prices on Power Pole connectors,
and have been good to deal with.
A crimper for the inserts is nice, but not essential.
I've never uses a crimper on Power Poles.
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|