Towertalk
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [TowerTalk] Tack welding rebar, need howto

from [Richard (Rick) Karlquist] [Permanent Link][Original]
To: EZ Rhino <EZRhino@fastmovers.biz>, "Roger (K8RI) on TT" <K8RI-on-TowerTalk@tm.net>
Subject: Re: [TowerTalk] Tack welding rebar, need howto
From: "Richard (Rick) Karlquist" <richard@karlquist.com>
Date: Fri, 03 Jan 2014 09:54:20 -0800
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com> 


On 1/2/2014 8:42 PM, EZ Rhino wrote:
Get eight more #4 rebars to use as diagonal
to keep the thing square while you're building
it so it doesn't turn into a parallelogram.

Great idea!

The rebar drawings never show these diagonals,
so I haven't used them in the past.  But this
sounds like a great idea in the future.  There
is no rule saying you can't put gratuitous
rebar in the hole.

Rick N6RK
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [TowerTalk] Tack welding rebar, need howto, Grant Saviers
Next by Date:  Re: [TowerTalk] Tack welding rebar, need howto, Charlie Gallo
Previous by Thread:  Re: [TowerTalk] Tack welding rebar, need howto, Roger (K8RI) on TT
Next by Thread:  Re: [TowerTalk] Tack welding rebar, need howto, Jim Lux
Indexes:  [Date] [Thread] [Top] [All Lists]