I don't have a drawing where I can find it.
There are *two* pieces of #9 (1 1/8") in each corner, with a radius
specified for the corners, rather than a
simple 90-degree right-angle. I think there are about 10 square hoops,
with two of them tied together
at the top and the rest spread out along the way.
Hope you can find an actual drawing on line.
Randy\
On 12/5/2013 8:46 AM, Shane Autrey wrote:
Gent's;
Do any of you happen to have a drawing showing the rebar cage for
a US Towers TX-489? I need to know bar size and how it needs to be
tied etc. I have found the generic US Towers brochure online that
shows the base dimensions and shows some rebar size but it doesn't
really show me how to lay the bar out etc. Very vague description in
the brochure to say the least. You can reply direct if you want or via
list.
Regards;
Shane KI4M
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
--
I am using the free version of SPAMfighter.
SPAMfighter has removed 2174 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len
Do you have a slow PC? Try a Free scan
http://www.spamfighter.com/SLOW-PCfighter?cid=sigen
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|