I've used the cold galvanize spray for touch ups in the past with good results.
However two years ago I repainted the entire tower with Rust Bullet which is
called a "rust inhibitive protective coating" by the manufacture.
http://www.rustbullet.com
I painted the tower using a combination of brushing and painting mitts.
73, Stew K3ND
________________________________
From: "john@kk9a.com" <john@kk9a.com>
To: towertalk@contesting.com
Cc: nf4l@comcast.net
Sent: Monday, December 2, 2013 9:21 AM
Subject: Re: [TowerTalk] Rust & paint
In Aruba I used Rustoleum rusty metal primer in the bad areas before
painting the entire tower with cold galvanizing once or twice a year. I
have never seen any primer instructions with the zinc enriched paint
however doing this did not seem to cause any bad reaction. I am not sure
what reaction the Reformer would cause. If the corrosion is minimal I
would just paint it the cold galvanizing product. It is easy to apply
with a painting mitt.
John KK9A
To: towertalk reflector <towertalk@contesting.com>
Subject: [TowerTalk] Rust & paint
From: Mike Reublin NF4L
Date: Mon, 2 Dec 2013 08:14:49 -0500
Would you use it with cold galvanizing, or alone?
73, Mike NF4L
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|