Towertalk
[Top] [All Lists]

Re: [TowerTalk] FW: FW: FW: Crank up questions.

To: towertalk@contesting.com
Subject: Re: [TowerTalk] FW: FW: FW: Crank up questions.
From: "Roger (K8RI) on TT" <K8RI-on-TowerTalk@tm.net>
Date: Fri, 29 Nov 2013 17:30:23 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On 11/29/2013 2:45 PM, Matt wrote:
For some reason the link got truncated.   Go to the main page

www.flukey.cc/km5vi

The base and rebar are sure different that the factory drawing I have for the old rebar setup. The tower base is not separate from the rebar.

What size are the holes you dug?

73

Roger (K8RI)


click on "New Station Progress" and then "Hoist Supports"

Matt
KM5VI


-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Matt
Sent: Friday, November 29, 2013 12:07 PM
To: 'reflector -tower'
Subject: [TowerTalk] FW: FW: Crank up questions.

I put some up here:

http://www.flukey.cc/km5vi/New%20Station/Hoist%20Supports/Hoist%20Supports.p
hp

Matt
KM5VI


-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Nate
Bargmann
Sent: Wednesday, November 27, 2013 6:53 AM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] FW: Crank up questions.

Hi Matt.

Do you have any pictures of your setup?

73, de Nate >>



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>