I also cut the cables the same length before installing the antennas by
laying them flat on the ground. I build identical antennas and use the
same model balun. When connecting the baluns it is very important to
connect them identically (center of the coax to the same side of the
driven element for each beam).
73,
John KK9A
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Determining coax length?
From: David Robbins <k1ttt@verizon.net>
Reply-to: k1ttt@arrl.net
Date: Tue, 12 Nov 2013 07:58:10 -0600 (CST)
well, you can probably get close enough by using the mechanical drawings for
the antennas to get the length of coax along the boom to the boom-mast clamp
then measure it from there.
any of the electronic measures will be less precise, but if you are
careful and
measure them all the same way you can probably get close enough if you just
calculate the differences in length and not the absolute length.
Personally I prefer to cut all the feedlines the same length when
populating a
tower, this means that some of them are too long and end up coiled on the
tower
but it gives the best matching of the phases.
Nov 12, 2013 08:50:28 AM, rich@n7tr.com wrote:
I am stacking several mono banders with a stackmatch II. I have the antennas
mounted on the towers, but the coax feedlines are different lengths right
now.
The Stackmatch wants coax lengths to both antennas to be the same length, but
I'm unable to physically measure to the end of the feedpoints on the boom.
All
coax is the same (RF Davis Buryflex)
Questions:
1) How critical are the coax lengths to the stackmatch from each stacked
antenna?
2) What tools can I use to determine the length of coax to each antenna? (AIM
4170, MFJ, etc?) and how do you determine equal lengths?
Thanks...
Rich
Rich N7TR
ex KI3V, N3AMK, WB3JOV
www.n7tr.com
http://www.qrz.com/db/N7TR
Telnet: dxc.n7tr.com N7TR DXCluster
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|