I did exactly that rather then use separate 250' long conductors to each
tower. Technically it should be grounded at the tower and the panel
entrance anyway.
John KK9A
Re: [TowerTalk] Connecting Tower to Ground Rod
from [Pete Smith N4ZR] [Permanent Link][Original]
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Connecting Tower to Ground Rod
From: Pete Smith N4ZR <n4zr@contesting.com>
Date: Thu, 10 Oct 2013 08:09:40 -0400
Does this standard apply even if, as in my case, the tower is 190 feet
from the house entrance? Does it need to be a direct, dedicated
connection, or could a hardline shield, for example, be used for the tower
to house electrical service ground connection. In cross section, even
LDF4-50A is a lot beefier than #6.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|