On 10/7/2013 kr2q@optimum.net wrote:
>
> Any suggestions on how to proceed?
> Thanks,
> de Doug KR2Q
Hi Doug,
You basically have a few options:
1)More penetrating oil (Kroil, PB Blaster etc), and wait, but this probably
wont work
2)a BIG "nut breaker" - basically it cracks the nut
3)Crack the nut using a cold chisel, saw, OA torch etc
4)Heat (probably the method Id try first) - get a torch (OA, Propane, or
whatever) and HEAT the nut. It does NOT have to get red hot, get it hot (say
200-300 degs) and try turning it with the wrench (while hot and or after it
cools, or both) - BTW, if you spray it with penetrating oil when hot, it'll
smoke like mad, but you'll tend to get more oil into the threads
When putting up the NEW tower, use never-seez (SIC - brand name) on your bolts
--
--
Charlie
www.baysidephoto.com
www.thegallos.com
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|