Those are the same insulators I have seen on the base of a Hy-Tower vertical.
So could be a Hy-Gain.
Could be a homebrew, but that coaxial balun housing looks commercial.
Earl
N8SS
----------------------------------------------------------------------
Message: 1
Date: Sun, 22 Sep 2013 17:23:53 -0500
From: "Ronald Anderson" <w9rma@charter.net>
To: <TowerTalk@contesting.com>
Subject: [TowerTalk] Antenna ID
Message-ID: <000301ceb7e2$6bcfde80$436f9b80$@net>
Content-Type: text/plain; charset="us-ascii"
Hi folks, I am trying to ID a antenna, below is a couple of photos of a
tri-band antenna.
It is a three element beam for 20-10 meters on element that wasn't taken
apart before I got it is 12 ft.
in length which I believe to be the director, no coils. The other two
elements have 4 coils , two on each side.
The coils are blue in color with exposed windings. It has a large balun
which was wound out of coax and put inside a metal shield, shown in photo 2.
I am looking for a pdf file with info on the antenna. Thanks for any help
you can give.
Photos are at: http://webpages.charter.net/ronald/Antenna.htm
Ron Anderson W9RMA
w9rma@charter.net <mailto:w9rma-3@charter.net>
------------------------------
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|