John,
What “box” are you using exactly? Thanks.
73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie
From: john@kk9a.com
Sent: Monday, July 15, 2013 11:24 AM
To: Jeff Blaine ; towertalk@contesting.com
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] cascading RCS-12
I use a six position relay box for 160-10 and then a separate relay box on the
output for each band where I have more than one antenna. The secondary box
allows me to use individual antennas or multiple antennas driven in phase.
John KK9A
On 2013-07-15 12:02, Jeff Blaine wrote:
160-6 with monoband types on most bands, and in some cases multiple antennas
per band (eg. vert + dipole).
73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie
-----Original Message-----
From: john@kk9a.com
Sent: Monday, July 15, 2013 9:23 AM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] cascading RCS-12
[TowerTalk] cascading RCS-12
Do you operate on 12 different bands though the same feedline?
Subject: [TowerTalk] cascading RCS-12
From: "Jeff Blaine" <keepwalking188@yahoo.com>
Date: Sun, 14 Jul 2013 22:19:54 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I have the Ameritron RCS-12 that I use in conjunction with a couple of
switches. This is an 8-position unit and it’s very flexible with respect to
configuration. But I need more switch selection positions (around 12
total).
So I was thinking of perhaps cascading two of these boxes. There are a
couple
of ways that could be done.
Has anyone found a better solution or done something similar?
73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|