Any large beam, fiberglass tube or aluminum is going to potentially whip in
wind. I've never seen any compelling evidence a SteppIR causes any more forces
at the rotator than an *equivalently* sized Al beam.
73,
Steve
________________________________
From: Joe Nuccio <k4nyy@yahoo.com>
To: Chris Pinholster <k4win@mac.com>
Cc: "towertalk@contesting.com" <towertalk@contesting.com>
Sent: Thursday, June 27, 2013 5:29 AM
Subject: Re: [TowerTalk] What rotor should I use
Hi Chris,
Thanks for the input and your experience.
The concern seems to that the 36' elements on the SeppIR start 'whipping' back
and
forth while the antenna is being rotated which puts a lot of stress on the
gears when it
comes to a stop. Apparently, this 'whipping' action is not of a concern on
large beams
made out of aluminum.
73, Joe K4NYY
________________________________
From: Chris Pinholster <k4win@mac.com>
To: Joe Nuccio <k4nyy@yahoo.com>
Cc: "towertalk@contesting.com" <towertalk@contesting.com>
Sent: Wednesday, June 26, 2013 9:10 PM
Subject: Re: [TowerTalk] What rotor should I use
Joe,
I have a Force 12C4 on my MA-40 and use a Yaesu 2800 SDX. Works fine for the
last five years.
Of course YMMV.
Chris K4WIN
Sent from my iPad
On Jun 25, 2013, at 12:51 PM, Joe Nuccio <k4nyy@yahoo.com> wrote:
> I have a US Tower MA-40, a MARB and MAF. I also have a SteppIR 3-element
>
> beam. What rotor do I need?
>
>
> One knowledgeable person about rotors has suggested thatSteppIR's put a
>
> lot of torque back and forth on rotors. He thinks a HAM-IV will getdestroyed
> and a t2x is marginal
> for the 3 elSteppIR because of the 16' boom and 36'
>
> long elements even when mounted inside a
> tower on a rotor plate. He wonders
>
> if a t2x can handle the rotation of the MA-40 tower and the SteppIR as well.
> He
> knows of many people using the MA-40 rotatable tower as I want to do, but,
> they
> aren't adding a SteppIR on top. He suggests abigger rotor or smaller antenna.
>
> .
>
> I know some people who are using a HAM-IV to rotate a MA-40 tower, but, they
> do
> have smaller beams. Please let me have your experiences and suggestions.
>
> 73 Joe K4NYY
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|