To: | towertalk@contesting.com |
---|---|
Subject: | Re: [TowerTalk] Coax and control lines in same PVC (Steve Jones)-Option |
From: | Jim Lux <jimlux@earthlink.net> |
Date: | Tue, 18 Jun 2013 06:02:22 -0700 |
List-post: | <towertalk@contesting.com">mailto:towertalk@contesting.com> |
On 6/18/13 1:02 AM, Ian White wrote: For remote control of a Beverage antenna selector, N4ZR has had good success with sending the 300MHz control signals out along the same coax that carries the incoming 160/80m signals. That same coax also carries DC power to the preamps. I believe that Pete documented this in NCJ. You can easily couple 2.4 GHz WiFi into the coax, for instance. No fancy directional coupler needed. _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [TowerTalk] Coax and control lines in same PVC, Pete Smith N4ZR |
---|---|
Next by Date: | Re: [TowerTalk] Coax and control lines in same PVC, Jim Lux |
Previous by Thread: | Re: [TowerTalk] Coax and control lines in same PVC (Steve Jones)-Option, Ian White |
Next by Thread: | Re: [TowerTalk] Coax and control lines in same PVC (Steve Jones)-Option, Ian White |
Indexes: | [Date] [Thread] [Top] [All Lists] |