Michael Fox wrote:
Subject: [TowerTalk] Tower Jack replacement
FYI - I found the following replica which includes both the Tower Jack and
the Leg Aligner function:
http://skyfabrication.com/index.php?main_page=product_info
<http://skyfabrication.com/index.php?main_page=product_info&cPath=5&products
_id=20> &cPath=5&products_id=20
Michael
N6MEF
And I now write:
If you want a tower jack, do what I did. I built my own.
I estimated the dimensions and built it.
Nothing precision about them and mine worked very well until I ran into a R25
that the fella crushed the legs by overtightening the bolts. Consequently, I
bent mine. I had to add material to it by welding jerry-rigged supports to it
so it doesn't look very pretty now but still works. I'll eventually build
another one but that's on the back burner now.
Roger
aka RoGrrr
KC8HZ
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|