> 2) Same ham with the new tower is on a mountaintop and only has a few
feet
of topsoil, then bedrock, to which he has to bond the base, rebar, etc.,
then pour largely above-ground concrete base into a form. He has
certified
design plans from the tower mfgr, so he is good in that arena, and has
exceeded the number & depth of core borings into the rock specified by the
mfgr. Question now is: what Epoxy or other material to use to set up the
bond of rebar and base bolts into the rock? The mfgr recommended some type
of material (I don't know what it is) but my ham buddy could not find it
locally (New England). Any suggestions on type of material, suppliers,
caveats?
You need some construction epoxy. It comes with the material and the
catalyst in one tube and mixes as it comes out. It's not cheap but very
effective - it's stronger than the concrete so no problem handling the anchor
rods.
Cheers,
Steve K7LXC
TOWER TECH -
Professional tower work for amateurs
Cell: 206-890-4188
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|