Towertalk
[Top] [All Lists]

Re: [TowerTalk] Engineering Sanity Check

To: towertalk-request@contesting.com
Subject: Re: [TowerTalk] Engineering Sanity Check
From: W1YW@aol.com
Date: Mon, 1 Apr 2013 11:07:25 -0400 (EDT)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>

In a message dated 4/1/2013 10:11:05 A.M. Eastern Daylight Time,  
hwardsil@gmail.com writes:

In order  to illustrate an article on temporary tower-raising, I put 
together a  simple sum-of-forces diagram.  Being a "milliamp and solder" 
guy, I  don't trust my ability to recall college-days Statics and 
Dynamics courses  well enough to publish it without review. Would one of 
the ME/CE mavens  out there contact me off-list to make a short review of 
it?  No  wet-stamp required :-)

73, Ward N0AX
 
Hi Ward,
 
I certainly could do this for you, as I am retired from BU, where one of my 
 jobs was as a professor of mechanical engineering; I taught the statics 
and  dynamics courses over many years(among many, including a telecom course 
and  other science and math courses unrelated to ME).
 
Unfortunately, in  Oct 2010, you asked for my help to write a chapter  for 
the Antenna Handbook, and a matter of weeks later then reneged, without any  
rational explanation. This experience makes me personally reluctant to 
assist  you. But perhaps there are others here on the list who have a more  
positive experience and can help you out. Wishing you luck on the article.
 
Best 73,
Chip W1YW
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>