Rock salt would tend to corrode the copper pipe, I believe they usually use
copper sulfate or something similar so the electrode isn't destroyed. The
bentonite by itself acts to help increase the conductivity around the rod.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net
-----Original Message-----
From: John E. Cleeve [mailto:g3jvc@jcleeve.idps.co.uk]
Sent: Sunday, March 03, 2013 23:29
To: K1TTT
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] Erico chemical ground electrode
Hello David,
Thank you for your response. Looking for a source on "Bentonite" it appears
that there are several types of "clay deposit" materials covered by the name
Bentonite, or Fullers Earth as it can be known over here, and it is used for
a suprising number of purposes.
>From the Erico diagram, it is claimed that the conductivity is improved by
what appear to be "roots" of conductivity "growing" from the holes in the
base of the electrode, out via the Bentonite layer at the base of the
electrode, into the surrounding ground, and there is no mention of
replenishing the "electrolyte salt" after a specified period.
I would like to try the experiment, using a length of copper central heating
tube. I have a professional ground resistance measuring test set, which I do
know how to use, but its the chemistry that will defeat me.
>From what I have read, the Bentonite could be used a "seal" to prevent the
"GEM" material from going further. I assume that the choice of "electrolytic
salts" and the recipe for the "GEM" material would be a closely guarded
commercial secret. But could it be that they are common, and relatively
cheap materials, such as rock salt and copper sulphate, but they have been
given a "new" name for commercial reasons.
Sincerely, John. G3JVC/GM3JVC.
> 'GEM' could just mean Ground Enhancement Material... which could just
> be bentonite or some mix of other conductive material. Usually
> chemical grounds like that require periodic replacement of the salts
> and would work best in damp areas or could use periodic watering. The
> idea is to simply increase the conductivity in the area around the rod
> by adding some kind of salt ions to the soil.
>
> David Robbins K1TTT
> e-mail: mailto:k1ttt@arrl.net
> web: http://wiki.k1ttt.net
> AR-Cluster node: 145.69MHz or telnet://k1ttt.net
>
> -----Original Message-----
> From: John E. Cleeve [mailto:g3jvc@jcleeve.idps.co.uk]
> Sent: Sunday, March 03, 2013 22:18
> To: Towertalk@contesting.com
> Subject: [TowerTalk] Erico chemical ground electrode
>
> Gentlemen,
>
> Has anyone had experience of using the Erico chemical ground electrode?
> The Erico claim is that one chemical ground electrode can be as
> effective as multiple ordinary ground rods.
>
> I am not sure if the Erico product is available in the UK, but from
> the available Erico literature, it would appear to be a copper tube,
> which has been packed with "electrolyte salts", the base of the tube
> has a number of holes drilled around the base. The method is to drill
> a hole in the ground, larger in diameter than the electrode, put a
> layer of Bentonite/Fullers earth in the bottom of the hole, lower the
> electrode to the Bentonite, to a depth that covers the holes in the
> tube, and then pack the vacant space around the Erico electrode, up to
> the ground surface, with Erico "Gem"
> material, whatever that might be. The electrodes come with cables
> already welded for connection.
>
> I am not a chemist, but I am intrigued, perhaps if we have a chemist
> among the group, who could provide a simple explanation of how this
> chemical electrode system might work, it would be appreciated.
>
>
>
> Sincerely, John. G3JVC/GM3JVC.
>
>
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|