Jorge,
Following is the link to the manual on MFJ website
http://www.cushcraftamateur.com/pdffiles/XM-240.pdf
EG is the SMALLEST diameter tube and is 3/8 inches OD x 36 inches long.
EA is the largest diameter tube and is 1-3/8 inches OD x 84 inches long.
EB is the 1-1/4 inch tube and is 48 inches long.
I would carefully check your antenna using this manual to see what you have.
Stan, K5GO
Sent from my iPad
On Jan 24, 2013, at 9:06 AM, "Jorge Diez - CX6VM" <cx6vm.jorge@gmail.com> wrote:
> Hello
>
>
>
> I need to order some part of the elements of the 40-2CD
>
>
>
> I don´t have the antenna here right now, but I made my notes of the damage
> sections but now reading the manual I have a doubt
>
>
>
> I need the EG tube of the driven element. This part is a 1 ¼ x 72´´ but in
> the dimension sheet I need to have 73´´ of this tube, so something is bad in
> the manual
>
>
>
> Anyone familiar with this antenna that can help me to determine the right
> dimension of the section I need?
>
>
>
> Thanks,
>
> Jorge
>
> CX6VM/CW5W
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|