On 1/5/2013 10:19 AM, Matrin Sole wrote:
Thanks Dave,
Yes, that's the one Ha, well it was early last year when I first came into
this great pile of stuff, sometimes you have to invest when you spy the
Alpha 77 in the pile! So I'm just working my way through it. Sold of a lot
of stuff but the rotator seems to have sat for a while, time to get it
moved.
I'd rather forgotten some of what came out of that thread, indeed I think
there were a couple of messages I missed altogether so thanks for the
pointer. Think it gives me enough to work with and will try to sell locally.
There are a couple of 'big' antenna stations in this corner of the world.
73
Martin, HS0ZED
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of K1TTT
Sent: 05 January 2013 20:44
To: 'Towertalk'
Subject: Re: [TowerTalk] Help with rotor valuation, Telrex
To refresh memories, you asked about this one last year (ain't google
great), and posted a picture at: http://tinyurl.com/78r5nk8 And there is a
thread in the archives describing it:
http://lists.contesting.com/archives//html/Towertalk/2012-02/msg00399.html
If the selsyns and motor work and there isn't too much play in the chain
drive I would probably pay $500 for it if someone had it nearby and I had a
use for it. Without a pressing need for it I might invest $250 and spend
some time cleaning it up to resell. It will probably need to be cleaned up
and painted, and maybe have the gear boxes opened up to check for
lubrication and make sure there isn't any water damage in them. The motor
should also probably be checked. One big problem with some of the old
telrex rotors is that they only fit in BIG towers, you can't stuff them into
rohn 25 or similar towers, and they are kind of a waste for small antennas
anyway. This kind of limits the market for them. The use of selsyns also
limits the use of after-market controllers, you have to refit them to use a
pot for indication or use the old controller.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net
-----Original Message-----
From: Matrin Sole [mailto:hs0zed@csloxinfo.com]
Sent: Saturday, January 05, 2013 13:05
To: 'Towertalk'
Subject: [TowerTalk] Help with rotor valuation, Telrex
I have a large rotator that I am trying to find information on and some idea
as to value. Since it is really too big for anything I might ever have I
will likely dispose of it if I can figure out a reasonable value. Weighs
about 40kG so unless you live in Thailand I don't think this is for you.
Boy, but do I wish you were a bit closer to Michigan, I'm planning a
heavy duty crank up and will have to construct something similar for a
rotator.
I was going to mount a rotator on the outside of a small tower ( still
might) so I already have the P80 chain, gears and idlers, but that's a
long way from the finished product.
73
Roger (K8RI)
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|