To: | richard@karlquist.com |
---|---|
Subject: | Re: [TowerTalk] Wire for prop pitch? |
From: | Frank <frankkamp@att.net> |
Date: | Thu, 06 Dec 2012 15:08:48 -0600 |
List-post: | <towertalk@contesting.com">mailto:towertalk@contesting.com> |
Rick Karlquist wrote: Frank wrote:Richard (Rick) Karlquist wrote:#4? Is that a typo? Seems a little bodacious for open wire line. Weight should be okay since it is aluminum.No. I originally had the shack 1000 feet from the low band vertical. It's nice to have 0.1 dB loss over 1000 feet of line on 160 meters. They don't really sell aluminum much smaller than #4. The light weight is great for suspending it. I have been extremely pleased with this line. BTW, 5 inch spacing gives me 450 ohms. You have to account for the XHHW insulation. Adds about an inch to the spacing vs bare wire. Rick N6RK Sounds great.You can buy 250 foot rolls of #17 aluminum electric fence wire. Costs about $7 a roll. Good for wire antennas. Probably not all that good for a 1000 foot run of lader line. _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [TowerTalk] Wire for prop pitch?, Spencer |
---|---|
Next by Date: | [TowerTalk] Tennadyne, steve jobes |
Previous by Thread: | Re: [TowerTalk] Wire for prop pitch?, Grant Saviers |
Next by Thread: | Re: [TowerTalk] Wire for prop pitch?, Jim Lux |
Indexes: | [Date] [Thread] [Top] [All Lists] |