John,
Threadlockers require ALL grease & oil be removed.
Otherwise, they don't work. I've used Henkel/Loctite
#271 (low viscosity highest strength "permanent"
thread lock) in all sorts of applications. Properly
applied, the ONLY way it lets go is by applying heat.
It can be found in finer auto parts and hardware
stores.
vy 73,
Bryan WA7PRC
> From John, K2SFS:
>
> >
> > Hi All:
> > Is there a sealer or some other recommended method to
> > improve maintaining rotator outside case screw tightness.
> > Checking my HAM IV after hurricane Sandy showed all
> > four bottom rotator screws 2 turns looser.
> > The commonly sold (red/blue) nut tightener available at
> > Harware stores does nothing.
> > 73,
> > John, K2SFS
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|