The Hygain T2X or Ham M style both are around 14.5" tall (without the
lower adapter) The AlfaSpid standard RAK is around 15" and the smaller RAU
is a bit under 14". The larger Spid RAK is around 14.5 as well. The short
base adapter (with holes to match a HyGain base pattern) would add maybe
.5 inches to these measurements. The MARB base in the US Tower catalogue
looks to have plenty of height clearance adjustment. Certainly if you
mounted either of them with the motor faced outwards, there should be
plenty of clearance. But I have not personally fitted one of our rotors to
the MARB base so you'd need to confirm there is enough height adjustment
for your situation.
73 Don
VE6JY
On Fri, Nov 16, 2012 at 7:32 PM, Randy Hollingsworth <randyholl@mchsi.com>wrote:
> Does anyone know if an Alpha Spid RAK or RAU rotator can be successfully
> mounted with a US Tower MA-550 mast with the MARB rotator base? The MA-550
> MARB was clearly made to work with a Yaesu or Ham-M style rotor, not sure
> if
> the Alfa Spid would work with it or not.
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|