Thanks Bill.
I thought a 24vdc ww would be hard to find.
Where did you find the ww of voltage and what was is the current rating ??
Good info, that's what I love about this forum.
73-
W1JCW
John
From: Bill Axelrod
Sent: Monday, October 08, 2012 7:20 PM
To: 'W1JCW' ; 'Dave Cole' ; towertalk@contesting.com
Subject: RE: [TowerTalk] RC1-H
Dave,
John,
I use a RC-1, the Y model, for a Yaesu G-1000 rotator. I use an
inexpensive 24 VDC wall wart for DC power so I don't have to grab any DC
power from an old control box. Had it for 3 1/2 years so far. It works
well and has been trouble free.
I have used it with N1MMRotor, DX Labs DX View, and PstRotatorAz
software. It operates seamlessly with this computer control.
73 Bill K3WA
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of W1JCW
Sent: Monday, October 08, 2012 17:17
To: Dave Cole; towertalk@contesting.com
Subject: [TowerTalk] RC1-H
I've been thinking about one of these for some time just haven't pulled the
trigger.
>From what I've read and there are videos on you tube it seems like a nice
unit.
You need to use the power from an existing controller box which isn't a big
deal.
I would make a nice solder less connector for the power for plug and play.
Hygain has the DCU-2 unit that is $400 or so that has this integrated into
the entire box.
73-
W1JCW
John
From: Dave Cole
Sent: Monday, October 08, 2012 8:39 AM
To: towertalk@contesting.com
Subject: [TowerTalk] Same question for the RC1-H
Anyone have any experience with the RC1-H by
http://www.mds-ham.com/RC1-H-Digital-Rotor-Control.htm
I am considering purchase of one of these...
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|