Put up your 40 or 50 feet of Rohn 25 and hang your UH and VHF antennas on itand
don't worry about guying it at all.
I speak from experience on that, as I have put up several 50 foot R25s with no
guys and put TH3s and CL33s on them. They have withstood all the storms that
came thru Ohio.
I know that Rohn says to guy them but that's the lawyers speaking for them. A
50 foot R25 is strong and doesn't need guys.
Roger
KC8HZ
Date: Sun, 9 Sep 2012 14:30:34 +0000
From: Missouri Guy <n0tt1@juno.com>
To: mikflathead@aol.com,TowerTalk@contesting.com
Subject: Re: [TowerTalk] guying a Rohn 25 tower
Message-ID: <20120909.143034.980.1.N0TT1@juno.com>
Content-Type: text/plain; charset=us-ascii
Some good info offered by others, but I would add that
If you have a reasonable choice, you might want to avoid guying
to the roof. Sooner or later, if your roof uses say, asphalt
shingles, it will need replacing. So then you're faced with
having to do some temporary guying or some kind of
work-around.
73,
Charlie, N0TT
On Sun, 9 Sep 2012 10:03:51 -0400 (EDT) mikflathead@aol.com writes:
>
> I would like to put up 40-50 feet of 25. It would be behind my
> single story ranch house. One guy would go towards the rear. The
> other 2 would head toward the front left and right. The easiest
> would be to guy to the roof. This tower will be for some vhf and uhf
> antennas. Your thoughts. Mike
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|