Larry-
If you go directly to the M2 website, open the .pdf file for the OR2800
rotator. On page 8 of 11, there is a table titled "Cable Information".
They tell you how big a wire you need for various distances. You'll need
14 AWG for the motor power wires for 250'. Wireman makes a custom cable for
the Orion which M2 recommends.
73,
Steve
N6SJ
----- Original Message -----
From: "Larry Loen" <lwloen@gmail.com>
To: "TowerTalk" <towertalk@contesting.com>
Sent: Thursday, July 26, 2012 2:44 PM
Subject: [TowerTalk] Resistance of Rotor Control Wires (see also CAT5
thread)
>I am trying to understand control wire (DC) resistance losses. This
> would be for my rotor control wire for my M2 atop my
> soon-to-be-erected 72 foot tower.
>
> I figure my total run is going to be fairly long -- about 215 feet
> (for a variety of reasons, a straight cable run is not in the cards --
> I have to go around my septic field and a shed). The specs for the M2
> rotor http://www.arraysolutions.com/Products/m2rotators.htm . . .show
> the minimum cable gauges are 2 at number 18 and 2 at number 22. This
> probably relates to the total amperage delivered and the planned
> voltage drop the unit can stand.
>
> Calculations given here:
> http://www.stealth316.com/2-wire-resistance.htm . . .are suggestive
> that I would want more like number 12 gauge if I wanted to keep the
> voltage loss to half a volt (apparently, the M2 design can stand a bit
> more?). There are a couple of other sources, including this one:
> http://www.mogami.com/e/cad/wire-gauge.html which, while it
> dispenses with the "circular mills" part of the calculations (at least
> overtly) seems to me to create a similar conclusion.
>
> This suggests to me that I should be looking at some hefty cable
> gauges if I want to be "really sure" of things working, but I get the
> impression that this is probably overkill, given what M2 itself seems
> to be recommending. A 72 foot tower would have a minimum run (if one
> wanted to keep the shack out of the fall zone) of about 150 feet for a
> 75 foot total tower exposure. And, I know M2s are popular with
> VHF/UHF hams, where a lot of towers are taller still. I'm sure lots
> of M2s have 200 plus foot runs.
>
> Still, in line with my overengineering of the project, what I probably
> would find ideal is some sort of four wire shielded cable at somewhere
> between 12 and 16 gauge if I could find such a thing. Or, would
> unshielded with a couple of ferrite beads at nor near the rotor be
> enough? That would simplify things quiet a bit.
>
> CAT cable looks suspiciously narrow gauge for my run, at least.
>
>
> Larry Wo0Z
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|