On 7/17/2012 2:28 PM, K8RI wrote:
> I know we've discussed this before, but I couldn't find the specific
> information.
>
> What are the best antenna analyzers for the Ham market? I'm referring
> to both portable and computer based. I have not found the MFJ line to
> be satisfactory. I have used one for some years.
Welll... I have the AIM 4170C hooked up, but the driver in Win 7 (64
bit) will not install for the USB/serial converter. It knows it's there
and even properly identifies it, but can't find a driver.
I've also downloaded the driver from the Internet, but it can't find it.
There is also a self installing version of the driver which I've also
tried. No go so far.
The 858 program works fine in demo mode, but without the device driver
there is nothing to set up or configure.
73
Roger (K8RI)
Unzip
>
> 73
>
> Roger (K8RI)
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|