Towertalk
[Top] [All Lists]

Re: [TowerTalk] help with rohn 25g bracket mount

To: Missouri Guy <n0tt1@juno.com>
Subject: Re: [TowerTalk] help with rohn 25g bracket mount
From: EZ Rhino <EZRhino@fastmovers.biz>
Date: Mon, 16 Jul 2012 17:39:47 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Correct, "veneer" brick is ridiculously easy to tear down.  We did a remodel 
and removed some brick in the front, did it all with a small sledge hammer and 
I could not believe how easy it came apart!!  Now a concrete filled cinderblock 
wall is something different....

You probably don't want to hear this, but support it the way it was 
designed....with guys!  I'm not a fan of supporting towers using a building, 
unless it's only for a 2m Jpole or something unsubstantial.

Chris
KF7P








On Jul 16, 2012, at 17:33 , Missouri Guy wrote:


On Mon, 16 Jul 2012 15:13:33 -0400 "k2vi" <k2vi@cox.net> writes:
> Im going to errect a 38' rohn tower next to my house. The house is 
> brick exterior. Should i drill straight through the brick into the 
> attic then put a 2x6 across or just used 6 anchors made for brick 
> that expand and just lock em in with 3/8 all thread. 

Hi Tony,

It would be best to go thru to your attic.  Spread 
the load with the 2x6 fastened over several studs...I think 
you were going to do that.  More....

The brick, probably just a "brick veneer"  (like 
on my house) is secured with "brick ties" that are nailed through to
the wall studs, then grouted into the various courses as they
are layed.  So, personally, I wouldn't trust the brick to
lend any substantial support.  When you do go through to your
attic, keep in mind that there would normally be an air space between
the back of the brick and the sheathing.  So, you would 
NOT want to over-tightnen the bolts.  You should consider
placing washers and nuts on the BACK of the 2x6, so there's
no load on the brick, brick ties, etc when the nuts on the 
FRONT are tightened.  Finish the connection with washers
and nuts on the front of the 2x6.  Doing that will place
all the load on just the wall studs, both inward and outward
stress.  Again, use a long 2x6 spanning over several wall
studs for the "ultimate" support.

Just my "barbershop" advice.  :D)

73,
Charlie, N0TT
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>