Thanks to W4TV and N2QT I got what I was looking for in record time. The
2BDQ looks the same as what I have.
73 to all - wy0v
-----Original Message-----
From: Joe Subich, W4TV
Sent: Friday, June 29, 2012 2:14 PM
To: Gary Johnson
Subject: Re: [TowerTalk] Help to Identify Traps
Could they be old Hy-Gain traps from the 2BDQ or 5BDQ?
See www.hy-gain.com - http://www.hy-gain.com/pdffiles/DP-2BDQ.pdf
73,
... Joe, W4TV
On 6/29/2012 3:00 PM, Gary Johnson wrote:
> I forgot to mention the diameter of the traps. They outer tube measures
> 1.6 inches and the inner tube .85 inches.
>
> Gary, wy0v
>
>
> From: Gary Johnson
> Sent: Friday, June 29, 2012 1:57 PM
> To: towertalk@contesting.com
> Subject: Help to Identify Traps
>
> I am looking for information on a pair of traps from from a wire antenna.
> The person who gave them to me does not remember what bands they were for
> or who made them. He thought maybe 40 / 80 meters.
>
> Each trap is made of two pieces of aluminum tube with plastic insulators
> between them. The center tube is 48 inches in length and the outer tube
> is 38 inches long. There is still wire on both ends of the traps, but it
> was cut so I am unable measure the original lengths. Any information
> would be appreciated. I can provide pictures if needed.
>
>
> Thanks,
> Gary, wy0v
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|