I agree with Kurt, adding a bearing plate is the best approach for your
tower. Here is one example: http://www.g0hwc.com/latest_projects.html
GL,
John KK9A
from [Rick Kiessig] [Permanent Link][Original]
To: <towertalk@contesting.com>
Subject: [TowerTalk] Rotator cage design
Date: Thu, 14 Jun 2012 18:02:12 +1200
I understand that rotators are not designed to handle lateral loads, and
that I should therefore have the rotator on one shelf, then a second shelf
above that with a radial support bearing on it, to handle the lateral
loads. The most likely antenna at the moment (still a moving target)
weighs 29kg, with a 7.2 sq ft wind load and a 6m turning radius. Kurt K7NV
suggested welding two plates on the side of my pole/tower, at the top, a
few feet apart. Does anyone know of existing designs/drawings for that
kind of
thing?
73, Rick ZL2HAM
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|