Hello Joe!
The TA33JR was my very first Yagi antenna back in 1973. It works very well
for its size.
The #41 blocks are metal (for the director and reflector mount). The #44
block is black plastic (for the driven element mount).
Good luck with your TA33JR rebuild project. You will have lots of fun with
that antenna!
73,
Tim K3LR
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Gary "Joe" Mayfield
Sent: Wednesday, April 25, 2012 10:08 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Mosley TA-33jr
I am rebuilding the club's TA-33jr (I know there are better antennas, but it
serves the purpose).
I have a couple of quick questions someone on the list will know.
1. Are the "element clamping blocks No. 41" that hold the director and
reflector to the boom made of metal or plastic?
2. How about the "element clamping blocks No. 44" that hold the
mounting plate to the mast?
Thanks and 73,
Joe kk0sd
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|