Towertalk
[Top] [All Lists]

Re: [TowerTalk] New ROTOR design at VISALIA DX convention

To: <TOWERTALK@contesting.com>
Subject: Re: [TowerTalk] New ROTOR design at VISALIA DX convention
From: <john@kk9a.com>
Date: Mon, 23 Apr 2012 20:50:28 -0000
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
It is great to see new rotators enter the market place however don't see how 
this product 
http://www.cytorq.com/files/Download/ULINK%20CYdwinder%201500%20DS%204%2011%2012.pdf
 
compares to a TIC ring rotator.  A TIC has 360 degrees rotation and can 
handle much larger antennas.  This rotator has a 36' boom maximum.  t turns 
very quickly, 300 degrees in 30 seconds, perhaps too quickly for anything 
large.

John KK9A


To:towertalk@contesting.com
Subject:[TowerTalk] New ROTOR design at VISALIA DX convention
From:JoshL <xxhound@gmail.com>
Date:Mon, 23 Apr 2012 08:31:33 -0700
List-post:<towertalk@contesting.com">mailto:towertalk@contesting.com>

Geezzz,  If you are like me , you have experienced
many ROTOR  failures over the years -
from problems with controllers,  direction sensors,
to a SHAFT actually shearing off -

W7CY has a new product , worth checking out
The Control cable works fine at  500 ft length !
It  uses STEP  motor with digital controller .

this is NOT you Daddy's rotor !

*www.cytorq.com   *

The CYDWINDER is side mount  -  with likely
future UPGRADE to larger motor -  I dislike
TIC RINGS - hard to install, hard to maintain
and tricky to climb around -  this is a solution
to that problem.  One hardcore  contester friend
had many TIC rings at his old QTH,  he told me
" never again "  !

Check out the WEB SITE -  you can download
SPEC sheets for various products

Josh   N7XM   Nevada 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>