Towertalk
[Top] [All Lists]

Re: [TowerTalk] original source of "avoid sharp bends" in lightning

To: towertalk@contesting.com
Subject: Re: [TowerTalk] original source of "avoid sharp bends" in lightning
From: K8RI <K8RI-on-TowerTalk@tm.net>
Date: Thu, 12 Apr 2012 16:37:07 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On 4/12/2012 11:26 AM, Drax Felton wrote:
> How come few houses of modern construction have lightning rods if they were 
> such an important invention?

Virtually all industrial installations have them on all buildings and 
distillation towers.
Where I worked *all* the buildings (except single story offices) 
including new construction had them. There's over a Billion (Yes that's 
with a "B")dollars of facility recently finished that has them.

When I put my 45G up about 10 years ago, nearly all 
tutorials/instructions on grounding, including grounding kits suggested 
that the ground cable be gently curved (dressed) away from the base of 
the tower and said to avoid any sharp bends.  I think they recommended a 
minimum bend radius of 6 to 8 inches. I don't see that listed any more.

However, even a tiny increase in inductance should be avoided.  I've 
seen lightning get off a grounded  tower part way down.  I've seen it 
jump to the guy wire and then get off after only 20 or 30 feet.

The high amperage builds a tremendous magnetic field with an opposing 
EMF. Combined with the rapid rise time it quenches the current flow and 
the lightning seeks an easier path, not necessarily physically shorter.

73

Roger (K8RI)

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>