Hi All,
I've been asked to put in a wifi system for a local event that's wayyyy out
of town.
We've had wifi available to people for a long time, but the vendors out
there are asking for a high reliability version for credit card processing
at the site.
Winds often hit 30 to 50 mph out there. Not daily but often enough that I'm
worried about the tower's ability to stand up in the middle of a bunch of
trailers and tents.
Resources I already have on hand are:
50ish foot old TV antenna crank up unit (with no base, but I could build
something). I'm worried about it needing to be guy'd.
6 10' sections of what I think is Rohn 45.
What I was thinking of trying is to build a plate (how thick and how big?)
that I could place under the tires of a rig. Then where the plate would
stick out from the tires I'd have pins that the rohn can attach to. I
figure 20' up would be plenty for this.
I've got a 65' bucket truck so standing the tower sections up would be
pretty easy for me.
I'm a bit worried that even with a trailer or truck sitting on the base it
could blow over if it's not big enough. But make it too big and I won't be
able to move it :-).
Thoughts and ideas?
thanks,
marlon
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|