Towertalk
[Top] [All Lists]

Re: [TowerTalk] Radiowavz end fed wire antenna

To: "'ronald long'" <rlong3@columbus.rr.com>, "'TowerTalk'" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Radiowavz end fed wire antenna
From: "Mike Baker" <k7dd@cox.net>
Date: Sat, 10 Mar 2012 09:29:03 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
It's an autotransformer.
T200-2 core works good.
3 or 4 turn primary, 29 or so turns on secondary.
Tie the cold ends of the windings together and they go to the coax shield
and ground or to a very short counterpoise wire, say 3 or 4 feet. You can
tweak it on frequency with the short wire.
The end of the big winding goes to the half wave end fed wire.
Simple stuff.
I have a QRP version that uses a T50-2 and a QRO version that uses the
T200-2, but T400-2 cores are available for those who want QROOOO.  ;>)

Mike Baker  K7DD
K7dd@cox.net


-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of ronald long
Sent: Saturday, March 10, 2012 9:11 AM
To: TowerTalk
Subject: [TowerTalk] Radiowavz end fed wire antenna

I wonder if anyone has cut open the matching gizmo on a Radiowavz end fed
wire antenna, such as the EF-40 or has any information on its design.
http://www.radiowavz.com/html/end_fed_h_w.html

What I call the matching gizmo has only one terminal so IMHO it cannot be a
balun. Could it obtain low VSWR by means of a resistor (loss)?

ron long w8gus

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>