On 1/30/2012 8:44 AM, Cqtestk4xs@aol.com wrote:
> I've heard of guys using real thick Teflon cutting board, pieces of oak,
> outdoor plywodd which was painted and my favorite...two toilet flanges as a
> sandwich with the plate in the middle and held together by a piece of PVC.
> I used the last for 10 years at the old station on KLM 6 el Yagis.
I simply use two pieces of pipe, one inside the other along with a
little grease.
I've also used TB-3s and TB-4s and the Yaesu bearings. I may try the
oversize pillow block with a weatherproof bearing that can be greased.
I understand a piece of Oak soaked in oil and properly mounted works
well too.
73
Roger (K8RI)
>
> For those of you with deep pockets and still wanting to use the TB3 by
> Rohn I still have a few of the TB-3s from the old station in great shape for
> $105 shipped.
>
> Bill K4XS/KH7XS
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|