Towertalk
[Top] [All Lists]

Re: [TowerTalk] suspending a OCF Windom from a tower

To: "R. Morris" <robrk@nidhog.net>
Subject: Re: [TowerTalk] suspending a OCF Windom from a tower
From: "K5MLC \(Mike\)" <k5mlc@sbcglobal.net>
Reply-to: "K5MLC \(Mike\)" <k5mlc@sbcglobal.net>
Date: Tue, 17 Jan 2012 15:57:25 -0800 (PST)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
The OCF is the best option for my limited real estate. Center feed would not 
fit! Other option would be end-fed. 


Mike
K5MLC


>________________________________
>From: R. Morris <robrk@nidhog.net>
>To: K5MLC (Mike) <k5mlc@sbcglobal.net> 
>Cc: towertalk <towertalk@contesting.com> 
>Sent: Tuesday, January 17, 2012 5:18 PM
>Subject: Re: [TowerTalk] suspending a OCF Windom from a tower
>
>On 01/17/2012 05:01 PM, K5MLC (Mike) wrote:
>> Good Afternoon,
>>  I recently erected an 134' OCF 7 band Windom @ 40' on my 50' tower with 
>>each end ending about 10' off the ground. The Windom is being fed with LMR 
>>400 through a 4:1 balun. I am experiencing higher than expected SWR reading 
>>on all bands. The Windom is attached directly to a leg of the the tower.
>
>Wire connected to the tower, no insulation ?? Why an OCF as an inverted V. Why 
>not a center feed dipole?
>
>
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>