On 1/3/2012 5:18 PM, K1TTT wrote:
> Check the original linked page, that place is only selling the 'P'
> type which is the polyester one(and only on special order at that).
Check again ... list all the products from that company on the R and L
site. You will find both the D and the F2-D ropes which are Dyneema
core (similar in performance/strength to Kevlar). The problem - as
explained to me - is that although Dyneema will not stretch under
dynamic load it will "creep" (slowly elongate) under static loads
like those encountered in guying applications.
73,
... Joe, W4TV
On 1/3/2012 5:18 PM, K1TTT wrote:
> Check the original linked page, that place is only selling the 'P' type
> which is the polyester one(and only on special order at that). The 'D'
> versions are on the manufacturer's page, and while the specs are better they
> are still only hd polyethylene rope.
>
> David Robbins K1TTT
> e-mail: mailto:k1ttt@arrl.net
> web: http://wiki.k1ttt.net
> AR-Cluster node: 145.69MHz or telnet://k1ttt.net
>
> -----Original Message-----
> From: Wayne Kline [mailto:w3ea@hotmail.com]
> Sent: Tuesday, January 03, 2012 20:58
> To: K1TTT; towertalk@contesting.com
> Subject: Re: [TowerTalk] Mastrant Rope ? guy wire ?
>
>
> My Frist Thought Dave Till I dug into it http://www.mastrant.com/en Wayne
> W3EA> Date: Tue, 3 Jan 2012 11:57:06 -0600
>> From: k1ttt@verizon.net
>> To: towertalk@contesting.com
>> Subject: Re: [TowerTalk] Mastrant Rope ? guy wire ?
>>
>>
>> thats just a polyester rope not a tower guy material unless you need it
> for a temporary field day type tower.
>>
>>
>>
>> Jan 3, 2012 12:43:42 PM, w3ea@hotmail.com wrote:
>>
>>
>>
>> Hi TT'ers HNY Planning my spring 10 meter tower antenna 5/5 35'-72'
>> rebuild. The 3/16 guy wire broken up with 502 insulators levels 32'
>> 64' It's in good shape but has rust wash near there attachment points
>> ! It's been up 22 years in this acid NE rain a new paint job new feed
>> lines rebuild the rotors .. why not new guy support. I Was thinking of
>> doing Phillystran, at least on the top layer. While researching it I
>> stumbled across a product Sold in the USA by RL Electronics in OH.
>> Mastrant guy rope !
>> http://store.rlham.com/shop/catalog/advanced_search_result.php?keyword
>> s=mastrant+and+mp&x=5&y=5Any TT'ers have any experience with this
>> stuff ? Have experience with all the old style and new type Philly
>> stuff and the Fiber-rod. nonconductive guying material . But this is a
>> new one for me. Thanks 73's Wayne W3EA
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|