This is like one of those KMART "PRICE CHECKS" - I have 15 sections of
Rohn 55 I plan to erect and tho it seems like it's good, I thought I
would like to have it re-galvanized.
It's painted, since it is the remnant of a 350 foot commercial tower
that was painted red and white. The GALV SHOP said they will dip in acid
(no option there. This is their standard cleaning procedure and it
doesn't matter what kind of coating it has on it. They WILL clean it so
they can guarantee their treatment) and then hot dip galv it. They want
$100 per section to do it, no quantity discount offered and they aren't
hard up for business so their price is what it always has been. I haven't
gotten prices from other galv shops yet.
Yes, it will look like new and WILL be as good as but at that price, I'm not
willing to pull the trigger just yet for my ham tower. Besides, I'm out in the
country so the fact that it is painted (white. I sold all the RED sections) is
of no consequence to me.
Message: 3
> Date: Mon, 12 Dec 2011 15:37:00 -0500
> From: "Eugene Jensen" <eugenejensen@nyc.rr.com>
> Subject: Re: [TowerTalk] Have you had old tower sections hot dip
> galvanized?
>
> After they return dry fit then on the ground and use a file or grinding disc
> and remove how much material it take to make the slide together. You can
> also use roll sandpaper that plumber use to clean copper pipes. Also use
> anti seize on the joints. I had large frame galvanized for the top of my
> SSMW and had to run taps though the holes but they had plug them but there
> was still leakage into the holes. I expected as much. 73 Gene K2QWD
>
>
>
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com] On Behalf Of John W
> Sent: Monday, December 12, 2011 3:02 PM
> To: TowerTalk
> Subject: [TowerTalk] Have you had old tower sections hot dip galvanized?
>
>
> I'm considering purchasing some older Rohn 45G/55G tower and having it
> re-galvanized.
> The tower is structurally sound, and I'd like it to stay that way as long as
> possible.
>
> My concern is whether the galvanizing process would add material at the tops
> of bottoms of the sections so as to make them impossible to fit together.
>
> Has anyone here had a tower re-dipped, and if so, what extra measures did
> you use to prevent this problem, if any?
>
> Thanks,
>
> John
> W2ID
>
> ------------------------------
>
> Message: 4
> Date: Mon, 12 Dec 2011 16:51:22 -0500
> From: George Dubovsky <n4ua.va@gmail.com>
> Subject: Re: [TowerTalk] Have you had old tower sections hot dip
> galvanized?
> One of the first steps in the re-galvanizing process is to completely strip
> the old galvanizing and surface rust/ mill scale/etc using an acid dip.
> After that step, the tower is bare steel and any added galvanizing should
> be the same as the factory stuff. One tip (learned the hard way): the
> galvanizing shop may not be all that familiar with tower sections, so make
> sure the sections are rigged to go into the tank on a slant (like 20-30
> degrees from horizontal) so they will drain readily, and insist that the
> BOTTOM of Rohn 25/45/55 be at the high end (go into the bath last). If not,
> I guarantee that a blob of zinc will form inside the tube at the bottom of
> the tower, and you will need a reamer and coarse file to clear it out. Much
> better for that "solder blob" to be on the outside at the top of the tower,
> where it's easily removed.
>
> I have had perhaps 400 feet of Rohn tower done and it's well worth the
> effort.
>
> 73,
>
> geo - n4ua
>
> On Mon, Dec 12, 2011 at 3:01 PM, John W <xnewyorka@hotmail.com> wrote:
>
> > Has anyone here had a tower re-dipped, and if so, what extra measures did
> > you use to prevent this problem, if any?
> > John
> > W2ID
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|