In a message dated 12/2/2011 11:40:47 A.M. Pacific Standard Time,
gm3sek@ifwtech.co.uk writes:
>> What I've learned is that you don't want to use a heavy grease
because
>>it traps water and contaminants and will cause the cable to rust from
the
>>inside out. Also the grease will attract particulates and the grease
will
>>turn out to be somewhat abrasive.
> Now which should I follow, Steve: that advice, or the LXC Prime
Directive to do what the manufacturer says?
Ah. The real manufacturer is the wire rope manufacturer so you should
follow their advice. My experience with them is to use a light lube such as
PreLube 6. There are other applications and suitable materials so the
ultimate choice is up to you. That's the nice thing about TT - you can decide
whose advice is worthwhile and whose isn't.
And - as always - the advice here is worth what you pay for it - hi.
Cheers,
Steve K7LXC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|