Towertalk
[Top] [All Lists]

Re: [TowerTalk] STAILNLESS STEEL BOLTS AND ALUNIMIUM ROTATOR CASINGPROBL

To: "JOHN POWELL" <powell.john@xtra.co.nz>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] STAILNLESS STEEL BOLTS AND ALUNIMIUM ROTATOR CASINGPROBLEM
From: "Mark Robinson" <markrob@mindspring.com>
Date: Thu, 17 Nov 2011 19:10:02 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
PB Blaster is supposed to be the best off the shelf stuff but an even better 
mixture which has a short shelf life is to mix ATF and acetone. You could 
give that a try.


Mark N1UK



----- Original Message ----- 
From: "JOHN POWELL" <powell.john@xtra.co.nz>
To: <towertalk@contesting.com>
Sent: Thursday, 17 November, 2011 6:46 PM
Subject: [TowerTalk] STAILNLESS STEEL BOLTS AND ALUNIMIUM ROTATOR 
CASINGPROBLEM


> Grateful thanks to all TTers who responded to my call for help with the 
> abovementioned problem, which are not only appreciated, they are most 
> helpful.
> I am making enquiries locally as to the availability of some of the 
> products, Mouse Milk, PB Blaster and Kano Kroil. I have WD40 and CRC 566 
> here and have only tried a "one shot" attempt with WD40.
>
> Thanks again.
> 73
> John. ZL1BHQ
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>