Mark,
I guess a couple of considerations would be the variation in radiation
elevation pattern and the feedpoint impedance - can the tuner handle it?
If we take as a benchmark a quarter-wave vertical over a moderate ground
system (5 Ohms), the vertical could grow to over 3/4 wavelength long
before the low angle radiation dropped below that of the quarter-wave.
In other words, a fixed length vertical that was a quarter-wave long at
the lowest frequency should be fine over at least a 3:1 frequency range.
To minimise the chance of matching problems you would probably want to
avoid half-wave lengths or multiples.
43ft seems to be a popular choice and avoids some of the most difficult
impedances, but the elevation pattern above 17m begins to look poor for
DX work.
73,
Steve G3TXQ
On 14/11/2011 15:00, Mark Beckwith wrote:
> Re: vertical antennas you can use on multiple bands with a tuner, are there
> magic lengths? I would just as soon put up one for "the low bands" and one
> for "the high bands." Or whatever. I figure the answer has already been
> determined long ago and I don't feel a particular need to discover it myself
> is someone can just tell me what the prevailing wisdom is.
>
> Thanks in advance,
>
> 73 - Mark, N5OT
>
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|